If you are planning to change the tiles of your bathroom then it is not a difficult task to do. All it wants is proper use of tools and knowledge of using them. There are countless choices of tile designs and types that you can use to update your bathroom. Two most common choices are glass tiles and ceramic tiles. If you want to install a glass tile then you just need to insure that they are rated for floor use.
Tools used in this process are- cutters, tile nippers, grout, a large sponge, grout spacers, and a notched trowel. However, for sheet tiles grout spacers are not required and they can be easily installed because they have ready to install mosaics.
Before starting the process you need to remove old tiles from your bathroom floor. It is little cumbersome to do. Once you have removed old layer, properly clean the surface so that it becomes smooth and ready for next layer. Use grease cleaners for removing extra grease from the surface.
Calculate the number of tiles by measuring the size of floor and dividing it by size of one tile. Once you have calculated the requirement go to the shop and buy some extra tiles along with required number because some tiles can break during replacement process or you may need them in coming future.
Remove all the molding and fixtures like the toilet or sinks from the bathroom. You also need to purchase subfloor, either green board or cement board and screw it to the floor. It should be cleaned and leveled.
You can now start placing the tiles along the longest wall. Mix tile adhesive and work in small areas at a time. After laying a tile, tap firmly with a rubber mallet to set. Use grout spacers between each tile to keep the spaces even and uniform. You can use the tile cutters and nippers to cut tiles and fit them around your cabinets, tubs, and other fixtures.
Now leave the tiles to set properly for 24 hours. After 24 hours, fill the space between tiles by grout using a trowel. Clean off extra grout by a wet sponge and run a damp mop. After this you need to leave your bathroom unused for around a week.
After a week your bathroom floor is perfectly ready to be used, you just need to put all the fixtures at their place. If some tiles are left, you should keep them for future use. You can now enjoy the new bathroom floor.
Scott Rodgers is a noted writer who has been providing ample guidance on plumbing works all over the country. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Blountstown Plumbers (Need one?click here!) to Mc David Plumbers (Need one?click here!).
Tags: business, Career, home, home and garden, Home and Plumbing, home improvement, Home plumbing system, home repair, Others, Plumbers, Plumbing Issues, Plumbing Solutions